Effects of Multi-Walled Carbon Nanotubes (MWCNTs)

Effects of Multi-Walled Carbon Nanotubes (MWCNTs) Spectral analysis, thermal behavior, XRD and morphology study in synthesis of carbon nanotubes decorated by Cysteamine Or A simple and efficient procedure for synthesis of Thiolic Composite with use Oxide Multi Walled Carbon Nanotube Or A simple and efficient procedure for synthesis of composite thiol with use oxide multi walled carbon nanotube and sulfur Or Behnam Maazinejad, Hamidreza Sadegh, Imran Ali, Ramin Shahryari Ghoshekandi, Vahid Ali Abstract In this paper, the effects of multi-Walled carbon nanotubes (MWCNTs) were studied as supports for the synthesis of MWCNT-COOH-Cysteamine nanocomposite. At first Purification MWCNT in H2SO4 and HNO3, solved and the solution earned ultrasound was to attain the equilibrium temperature to functionalization of carboxylate multi walled carbon nanotubes (MWCNT-COOH). Then using Cysteamine hydrochloride and NHS and DMF and EDC and MWCNT-COOH the mixture was refluxing. The prepared on thiol derivatized nanocomposite were analyzed by X-ray Diffraction, Scanning electron microscope, FTIR spectroscopy, Transmission Electron Microscopes (TEM) and Thermogravimetric Analysis (TGA). Keywords MWCNTs, Carbon nanotubes, Functionalization, Cysteamine, Surface modification, Nanocomposite, Thiol, CNT 1. Introduction Nanotechnology is significantly impressive Science and Economy in the 21st century [1]. Carbon, in different forms, has been long used as the main constituent material of solid electrodes as a further too metal electrodes [2]. After the first Iijima elucidation of their structures in 1991 [3], carbon nanotubes have attracted considerable interdisciplinary interest [4]. Carbon nanotubes are promising additives for thermoplastics, due to their superior mechanical, thermal, magnetic and electrical properties [5]. To optimize the potential applications of carbon nanotubes, it is essential to modify the carbon nanotubes with functional groups and/or nanoparticles in order to integrate the carbon nanotubes into desired structures or attach suitable nanostructures to them [6]. Carbon nanotubes possess high flexibility, large aspect ratios (Normally >1000), unique internal structures, electrical conductivity, high chemical activity, low mass density, high electro active surface area, thermal stability and great mechanical strength [7]. CNTs have extraordinary electrical conductivity and heat conductivity and mechanical properties, they are probably the top electron field-emitter possible, and their material properties can accordingly approach closely the very high levels intrinsic to them [8]. Hence, CNT’s have received considerable attention for usage in chemistry and environmental remediation [9]. CNTs represent an exquisite class of nanomaterials that stepped into the nanomedicine arena not more than a decade behind [10]. The two main types of carbon nanotubes are the single-walled carbon nanotubes (SWCNT) and multi-walled carbon nanotubes (MWCNT), yet there are some other rare types such as fullerite, torus, and nanoknot [11]. Surface functional groups can modify the surface charge, functionality and reactivity of the surface, and increase the stability, and dispensability of Different materials [12-13]. Organic sulfur compounds are wide-spreading in numerous natural products and widely used as multiple artificial chemicals [14]. The structure and surface chemistry of organic thin films is a research region related to several interfacial processes, including biological events, lubrication, adhesion, wettability, corrosion, electrochemistry, and microelectronic fabrication. To acquire the optimum performance of a material or device in one of these applications, the organic thin film must be prepared with the right type, concentration, and arrangement of functional handle. Functionalization of carbon nanotubes is found to be an efficient way of modification processes which in public is divided in two main categories: noncovalent and covalent. Covalent functionalization is an irretrievable process of appendag e on the nanotube walls or tips it is based on the formation of a covalent coupling between functional entities and the carbon skeleton of nanotubes. Non-covalent functionalization is based on supramolecular complexation using different adsorption forces, such as van der Waals, hydrogen bonds, electrostatic force and Ï€-Ï€ stacking interactions. [57.15-55-56]. Thiols are the maximum reactive nucleophilic reagents among altogether the biological models investigated [16]. Thiol group is an alright ligand because of its strong affinity to various heavy metal ions as a result of Lewis acid–base interactions [17]. To various heavy metal ions as a result of Lewis acid–base interactions [3]. Thiol Derivatives paper Cysteamine an aminothiol, is used to decrease tissue cystine content in patients with nephropathic cystinosis, an autosomal recessive lysosomal storage disorder in which intracellular cystine accumulates due to impaired redeploy out of lysosomes [18]. Cysteamine is a sulfhydryl containing compound which appears to arise from the decarboxylation of cysteine or the breakdown of pantetheine [19]. Scheme 1. Is a schematic Cysteamine. [20] Scheme 1. Cysteamine Table 2: Structure and characteristics of Cysteamine [21] Cysteamine () is one of the simplest molecules able to bond with the each atoms surface through its sulfur and nitrogen atoms and a prerequisite for the design of compact monolayers with acceptable properties is a fundamental understanding of the forces captive in the self-assembly process, and the characterization of the film at the molecular level [22]. Cysteamine as drug applications that have been noted in the table 3 below: Table 3 In this study, we functionalized multi-walled carbon nanotubes with carboxyl group and thiol-derivatized via condensation reaction between carboxylated-MWCNT powders and Cysteamine. Infrared (IR) spectroscopy, XRD, SEM, TEM and TGA were used to characterize the presence of Cysteamine on the MWCNT-COOH surface. 2. Experimental Procedures 2.1. Materials Multi-walled carbon nanotubes (MWCNTs) with Purity 95 %, outer diameter and length and manufacturing method catalytic chemical vapor deposition were purchased from US Research Nanomaterials, Inc. Sulfuric acid (97 %, AR grade) and nitric acid (37%, AR grade) were purchased from Sigma-Aldrich. N,N-dimethylformamide (DMF:98%), 1-ethyl-(3-3’-dimethylaminopropyl) carbodiimide (EDC: 97%), N-hydroxysuccinimide (NHS: 99%) were purchased from Merck Millipore and Cysteamine hydrochloride (99%) were purchased from sigma Aldrich and used as received unless otherwise stated. 2.2 Characterization methods 2.2.1 X-ray diffraction (XRD) X-ray diffraction studies were carried out with an X-ray diffractometer (Model No. D8-Advance, Bruker AXS). 2.1.2 Fourier transform infrared spectroscopy (FTIR) The functional groups on the MWCNTs surface were determined using Fourier transform infrared FTIR method (VERTEX 70, Brucker). FTIR spectrum of MWCNTS was recorded in the range of 4000– 400 using pellets method. 2.2.3 Transmission electron microscopy (TEM) The morphologies and sizes of the nano-structures were characterized by transmission electron microscope â€Å"TEM† (PHILIPS EM 208). 2.2.4 Thermogravimetric analysis (TGA) Thermogravimetric analysis (TGA) was carried out using a TG Labsys DSC, Setaram. 2.2.5 Scanning electron microscope (SEM) The size and morphology of MWCNTs was investigated by high-resolution transmission electron microscopy (VEGA3, TESCAN). 2.3 Synthesis method At first [1] (1g) was treated with 20% hydrochloric acid for 120 min sonication, to remove impurities such as residual catalysts and amorphous carbons in the phase of synthesis , Then the sample was filtered with Millipore membrane filter 0.22 and washed many successive times with distilled water. 2.3.1 Oxidation of MWCNTs Multi-walled carbon nanotubes was synthesized by a formerly reported method [52-53]. 0.75 g of pristine MWCNTs was added to 180ml mixture of concentrated HNO3 and H2SO4 (1:3, v/v) and then ultrasonicated for a course of 140 min. then mixture was transferred to a flask equipped with a condenser and was refluxed with drastic shocking at 75 for 6 h. After cooling to Ambient temperature the mixture was filtered with filters paper and filtrated solid was washed thoroughly by deionized water until the filtrate pH was close to neutral. The filter sample was then dried in a vacuum oven at 80 oC for 120 min. The sample was abbreviated as MWCNT-COOH. 2.3.2 [1] Pavani, K. V., Gayathramma, K., Banerjee, A., Suresh, S. (2013). Phytosynthesis of Silver Nanoparticles Using Extracts of Ipomoea i ndica Flowers. American Journal of Nanomaterials, 1(1), 5-8. [2] Garcà ­a-Gonzà ¡lez, R., Fernà ¡ndez-La Villa, A., Costa-Garcà ­a, A., Fernà ¡ndez-Abedul, M. T. (2013). Dispersion studies of carboxyl, amine and thiol-functionalized carbon nanotubes for improving the electrochemical behavior of screen printed electrodes. Sensors and Actuators B: Chemical, 181, 353-360. [3] Sanagi, M. M., Hussain, I., Ibrahim, W. A. W., Yahaya, N., Kamaruzaman, S., Abidin, N. N. Z., Ali, I. (2014). Micro extraction of Xenobiotics and Biomolecules from Different Matrices on Nano Structures. Separation Purification Reviews, (just-accepted). [4] Sadegh, H., Shahryari-Ghoshekandi, R., Kazemi, M. (2014). Study in synthesis and characterization of carbon nanotubes decorated by magnetic iron oxide nanoparticles. International Nano Letters, 4(4), 129-135. [5] Mahmoodi, M., Arjmand, M., Sundararaj, U., Park, S. (2012). The electrical conductivity and electromagnetic interference shielding of injection molded multi-walled carbon nanotube/polystyrene composites. Carbon, 50(4), 1455-1464. [6] Zhang, Q., Zhu, M., Zhang, Q., Li, Y., Wang, H. (2009). The formation of magnetite nanoparticles on the sidewalls of multi-walled carbon nanotubes. Composites Science and Technology, 69(5), 633-638. [7] Mahmoodian, H., Moradi, O., Shariatzadeh, B. (2014). Grafting chitosan and polyHEMA on carbon nanotubes surfaces: â€Å"Grafting to† and â€Å"Grafting from† methods. International journal of biological macromolecules, 63, 92-97. [8] Moradi, O., Sadegh, H., Shahryari-Ghoshekandi, R., Norouzi, M. (2014). Application of Carbon Nanotubes in Nanomedicine: New Medical Approach for Tomorrow. Handbook of Research on Diverse Applications of Nanotechnology in Biomedicine, Chemistry, and Engineering, 90. [9] Bahrami, K., Khodaei, M. M., Soheilizad, M. (2009). Direct conversion of thiols to sulfonyl chlorides and sulfonamides. The Journal of organic chemistry, 74(24), 9287-9291. [10] Jain, S., Thakare, V. S., Das, M., Godugu, C., Jain, A. K., Mathur, R., Mishra, A. K. (2011). Toxicity of multi-walled carbon nanotubes with end defects critically depends on their functionalization density. Chemical research in toxicology, 24(11), 2028-2039. [11] Aqel, A., El-Nour, K. M., Ammar, R. A., Al-Warthan, A. (2012). Carbon nanotubes, science and technology part (I) structure, synthesis and characterisation. Arabian Journal of Chemistry, 5(1), 1-23. [12] Wang, Y., Iqbal, Z., Mitra, S. (2006). Rapidly functionalized, water-dispersed carbon nanotubes at high concentration. Journal of the American Chemical Society, 128(1), 95-99. [13] Saleh, T. A., Gupta, V. K. (2013). Covalent and Nonà ¢Ã¢â€š ¬Ã‚ Covalent Functionalization of Carbon Nanotubes.Advanced Carbon Materials and Technology, 317-330. [14] VukoviĆ¡, G. D., MarinkoviĆ¡, A. D., ÄŒoliĆ¡, M., RistiĆ¡, M. Ä ., AleksiĆ¡, R., PeriĆ¡-GrujiĆ¡, A. A., UskokoviĆ¡, P. S. (2010). Removal of cadmium from aqueous solutions by oxidized and ethylenediamine-functionalized multi-walled carbon nanotubes. Chemical Engineering Journal, 157(1), 238-248. [15] Castner, D. G., Hinds, K., Grainger, D. W. (1996). X-ray photoelectron spectroscopy sulfur 2p study of organic thiol and disulfide binding interactions with gold surfaces. Langmuir, 12(21), 5083-5086. [16] Holmgren, A., Sengupta, R. (2010). The use of thiols by ribonucleotide reductase. Free Radical Biology and Medicine, 49(11), 1617-1628. [17] Vieira, E. S., Simoni, J. A. (1997). Interaction of cations with SH-modified silica gel: thermochemical study through calorimetric titration and direct extent of reaction determination. Journal of Materials Chemistry, 7(11), 2249-2252. [18] Gahl, W. A. (2003). Early oral Cysteamine therapy for nephropathic cystinosis. European journal of pediatrics, 162(1), S38-S41. [19] Kuņºmierek, K., Bald, E. (2008). Measurement of reduced and total Mercaptamine in urine using liquid chromatography with ultraviolet detection. Biomedical Chromatography, 22(4), 441-445. [20] Reid, E. Emmet (1958). Organic Chemistry of Bivalent Sulfur 1. New York: Chemical Publishing Company, Inc. pp. 398–399. [21] Lukashin, B. P., Grebeniuk, A. N. (2000). [Comparative study of the radiation-protective effectiveness of low doses of cysteamine, heparin, and naphtizine in experiments on mice]. Radiatsionnaia biologiia, radioecologiia / Rossiiskaia akademiia nauk, 41(3), 310-312. [22] Bloxham, S., Eicherà ¢Ã¢â€š ¬Ã‚ Lorka, O., JakubÄ-nas, R., Niaura, G. (2003). Adsorption of Cysteamine at Copper Electrodes as Studied by Surfaceà ¢Ã¢â€š ¬Ã‚ Enhanced Raman Spectroscopy. Spectroscopy letters, 36(3), 211-226. [23] Dayalu, P., Albin, R. L. (2015). Huntington Disease: Pathogenesis and Treatment. Neurologic clinics, 33(1), 101-114. [24] Kurlan, R., Evans, R., Wrigley, S., McPartland, S., Bustami, R., Cotter, A. (2015). Tai Chi in Parkinson’s disease: A Preliminary Randomized, Controlled, and Rater-Blinded Study. Advances in Parkinsons disease, 4(01), 9. [25] Than, N. N., Newsome, P. N. (2015). A concise review of non-alcoholic fatty liver disease. Atherosclerosis. 239(1), 192–202. [26] Bordon, Y. (2015). Microbiota: Gut bacteria cross malaria. Nature Reviews Immunology, 15(1), 1-1. [27] Brawer, J.R. et al. (1994) the origin and composition of peroxidase-positive granules in cysteamine-treated astrocytes in culture. Brain Res. 633, 9–20. [52] Wu, T. M., Lin, Y. W. (2006). Doped polyaniline/multi-walled carbon nanotube composites: Preparation, characterization and properties. Polymer, 47(10), 3576-3582. [53] Xu, J., Yao, P., Li, X., He, F. (2008). Synthesis and characterization of water-soluble and conducting sulfonated polyaniline/ para-phenylenediamine-functionalized multi-walled carbon nanotubes nano-composite. Materials Science and Engineering: B, 151(3), 210-219. [55] Ansari, R., Ajori, S., Rouhi, S. (2015). Elastic properties and buckling behavior of single-walled carbon nanotubes functionalized with diethyltoluenediamines using molecular dynamics simulations. Superlattices and Microstructures, 77, 54-63. [56] Bie, B. X., Han, J. H., Lu, L., Zhou, X. M., Qi, M. L., Zhang, Z., Luo, S. N. (2015). Dynamic fracture of carbon nanotube/epoxy composites under high strain-rate loading. Composites Part A: Applied Science and Manufacturing, 68, 282-288. [57] Shi, Q., Yang, D., Su, Y., Li, J., Jiang, Z., Jiang, Y., Yuan, W. (2007). Covalent functionalization of multi-walled carbon nanotubes by lipase. Journal of Nanoparticle Research, 9(6), 1205-1210. [1] Raw Carbon nanotubes( pure carbon nanotubes: p-MWCNT)